Sediment cores were collected from the East Antarctic margin, aboard the Australian Marine National Facility R/V Investigator from January 14th to March 5th 2017 (IN2017_V01; Armand et al., 2018). This marine geoscience expedition, named the “Sabrina Sea Floor Survey”, focused notably on studying the interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles. The cores were collected using a multi-corer (MC) and a Kasten corer (KC). The MC were sliced every centimetre, wrapped up in plastic bags, and stored in the fridge. The KC was sub-sampled using an u-channel; and sliced every centimetre once back the home laboratory (IMAS, UTAS, Hobart, Australia). This dataset presents concentrations of major and trace elements measured in bulk multi-cores sediment samples collected during the IN2017_V01 voyage. The data include the sampling date (day/month/year), the latitude and longitude (in decimal degrees), the seafloor depth (in meter), the sediment core ID, the sediment depth (in cm), and the concentrations (in ppm or μg/g) of a suite of elements. This dataset presents concentrations of major and trace elements measured in bulk sediment samples collected during the IN2017_V01 voyage. The data include the sampling date (day/month/year), the latitude and longitude (in decimal degrees), the seafloor depth (in meter), the sediment core ID (KC14), the sediment depth (in cm), and the concentrations (in ppm or μg/g) of a suite of elements. About 200 mg of dried and ground sediment were weighed into a clean Teflon vial and oxidized with a mixture of concentrated HNO3 and 30% H2O2 (1:1). Samples were then digested in open vials using an acid mixture comprising 10 mL HNO3, 4 mL HCl, and 2 mL HF, at 180°C until close to dryness. Digested residues were converted to nitric form before being oxidised with a mixture of 1 mL HNO3 and 1 mL HClO4 at 220°C until fully desiccated. Samples were finally re-dissolved in 4 mL 7.5 M HNO3. A 400 μL aliquot was removed from the 4 mL digest solution and diluted ~2500 times in 2% HNO3 for trace metals analysis by Sector Field Inductively Coupled Mass Spectrometry (SF-ICP-MS, Thermo Fisher Scientific, Bremen, Germany) at the Central Science Laboratory (UTAS, Hobart, Australia). Indium was added as internal standard (In, 100 ppb). 88Sr, 89Y, 95Mo, 107Ag, 109Ag, 111Cd, 133Cs, 137Ba, 146Nd, 169Tm, 171Yb, 185Re, 187Re, 205Tl, 208Pb, 232Th, 238U, 23Na, 24Mg, 27Al, 31P, 32S, 42Ca, 47Ti, 51V, 52Cr, 55Mn, 56Fe, 59Co, 60Ni, 63Cu and 66Zn were analysed using multiple spectral resolutions. Element quantification was performed via external calibration using multi-element calibration solutions (MISA suite, QCD Analysts, Spring Lake, NJ, USA). Raw intensities were blank and dilution corrected. References L.K. Armand, P.E. O’Brien and On-board Scientific Party. 2018. Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles (IN2017-V01): Post-survey report, Research School of Earth Sciences, Australian National University: Canberra.

Samples were collected from the East Antarctic margin, aboard the Australian Marine National Facility R/V Investigator from January 14th to March 5th 2017 (IN2017_V01; Armand et al., 2018). This marine geoscience expedition, named the “Sabrina Sea Floor Survey”, focused notably on studying the interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles. Ten litres seawater samples were collected using a CTD rosette equipped with Niskin® bottle and filtered through a 0.45µm Acropak® capsule filter directly into acid-cleaned 10 L polyethylene jerrycans. Samples were then acidified to pH 2 with 2 mL/L of distilled 6M HCl in a laminar flow hood. These samples were analysed for neodymium (Nd) isotopes, a tracer of ocean circulation. In the home laboratory (IMAS Trace-Metal Lab, UTAS, Hobart, Australia), seawater samples were pre-concentrated using pre-packed Nobias® PA1L (Hitachi Technologies, Japan) chelating resin cartridges following the method of Pérez-Tribouillier et al., (2019). Rare Earth Elements were separated using anion-exchange chromatography (Anderson et al., 2012) and cation-exchange chromatography (Struve et al., 2016). Finally, Nd isotopes were isolated using LN-Spec column chemistry (Pin and Zalduegui, 1997). Purified seawater sample Nd concentrations were checked prior to isotopic analysis using Sector Field Inductively Coupled Mass Spectrometry (ICP-MS) at the Central Science Laboratory (UTAS, Hobart, Australia). Nd isotope ratio measurements were then carried out at the Geochemistry Laboratory of the School of Geography, Environment and Earth Sciences of Victoria University of Wellington, New Zealand, using a Thermo Finnigan Triton thermal ionization mass spectrometer (TIMS). Data were reduced offline for outlier rejection and corrected using 146Nd/144Nd = 0.7219 for mass fractionation using the exponential law, and 144Sm/147Sm = 0.20667 for the Sm interference correction on mass 144. JNdi standard data produced for two load sizes using two amplifier configurations were identical: 143Nd/144Nd = 0.512110 ± 24 2sd (46 ppm 2rsd, n = 16) for 1 ng loads using 1013Ω amplifiers, vs. 143Nd/144Nd = 0.512112 ± 3 2sd (6 ppm 2rsd, n = 6) for 100 ng loads using 1011Ω amplifiers. The corrected 143Nd/144Nd were normalised to the JNdi standard with the published value of 0.512115 (Tanaka et al., 2000). Nd isotopic compositions are reported as eNd = [(143Nd/144Nd)sample / (143Nd/144Nd)CHUR - 1]x10,000 , where CHUR is the Chondritic Uniform Reservoir with 143Nd/144Nd)CHUR = 0.512638 (Jacobsen and Wasserburg, 1980). References - Anderson R. F., Fleisher M. Q., Robinson L. F., Edwards R. L., Hoff J. A., Moran S. B., van der Loeff M. R., Thomas A. L., Roy-Barman M. and Francois R. (2012) GEOTRACES intercalibration of 230Th, 232Th, 231Pa, and prospects for 10Be. Limnol. Oceanogr. Methods 10, 179–213. A - Armand L. K., O’Brien P. E., Armbrecht L., Baker H., Caburlotto A., Connell T., Cotterle D., Duffy M., Edwards S., Evangelinos D., Fazey J., Flint A., Forcardi A., Gifford S., Holder L., Hughes P., Lawler K.-A., Lieser J., Leventer A., Lewis M., Martin T., Morgan N., López-Quirós A., Malakoff K., Noble T., Opdyke B., Palmer R., Perera R., Pirotta V., Post A., Romeo R., Simmons J., Thost D., Tynan S. and Young A. (2018) Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles (IN2017-V01): Post-survey report. ANU Res. Publ. - Jacobsen S. B. and Wasserburg G. J. (1980) Sm-Nd isotopic evolution of chondrites. Earth Planet. Sci. Lett. 50, 139–155. - Pérez-Tribouillier H., Noble T. L., Townsend A. T., Bowie A. R. and Chase Z. (2019) Pre-concentration of thorium and neodymium isotopes using Nobias chelating resin: Method development and application to chromatographic separation. Talanta, 1–10. - Pin C. and Zalduegui J. F. S. (1997) Sequential separation of light rare-earth elements , thorium and uranium by miniaturized extraction chromatography: Application to isotopic analyses of silicate rocks. Anal. Chim. Acta 339, 79–89. - Struve T., Van De Flierdt T., Robinson L. F., Bradtmiller L. I., Hines S. K., Adkins J. F., Lambelet M., Crocket K. C., Kreissig K., Coles B. and Auro M. E. (2016) Neodymium isotope analyses after combined extraction of actinide and lanthanide elements from seawater and deep-sea coral aragonite. Geochemistry, Geophys. Geosystems 17, 232–240. - Tanaka T., Togashi S., Kamioka H., Amakawa H., Kagami H., Hamamoto T., Yuhara M., Orihashi Y., Yoneda S., Shimizu H., Kunimaru T., Takahashi K., Yanagi T., Nakano T., Fujimaki H., Shinjo R., Asahara Y., Tanimizu M. and Dragusanu C. (2000) JNdi-1: A neodymium isotopic reference in consistency with LaJolla neodymium. Chem. Geol. 168, 279–281.

Samples were collected from the East Antarctic margin, aboard the Australian Marine National Facility R/V Investigator from January 14th to March 5th 2017 (IN2017_V01; Armand et al., 2018). This marine geoscience expedition, named the “Sabrina Sea Floor Survey”, focused notably on studying the interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles. Ten litres seawater samples were collected using a CTD rosette equipped with Niskin® bottle and filtered through a 0.45µm Millipore GWSC04510: Ground Water sampling capsule, directly into acid-cleaned 10 L polyethylene jerrycans. Samples were then acidified to pH 2 with 2 mL/L of distilled 6M HCl in a laminar flow hood. These samples were analysed for thorium isotopes (230Th and 232Th), a tracer of particle dynamics. The sample preparation was carried out in the clean lab of the Institute for Marine and Antarctic Studies (UTAS, Hobart). Seawater samples were acidified with HF (final concentration 0.6 mM, Middag et al., 2015), spiked with 10 pg of 229Th (NIST 4328C, National Institute of Standards and Technology, USA) and left to equilibrate for at least 48h. Samples were preconcentrated using Nobias® PA1L (Hitachi Technologies, Japan) cartridges, following the procedure of Pérez-Tribouillier et al., (2019). The separation and purification of thorium isotopes were performed by anion-exchange chemistry (Anderson et al., 2012). Purified Th fractions were analysed using an Element II Sector Field Inductively Coupled Plasma Mass Spectrometer (SF-ICP-MS, Thermo Fischer Scientific, Bremen, Germany) at the Central Science Laboratory (CSL) of the University of Tasmania. Sample introduction was achieved using an Aridius® II desolvating nebulizer (DSN, CETAC Technologies, USA). The capacitive guard electrode was activated to maximise signal sensitivity. Raw intensities of 230Th and 232Th were blank and mass bias corrected. Concentrations were calculated using the isotope dilution equation reported in Sargent et al., (2002). References - Anderson, R. F., Fleisher, M. Q., Robinson, L. F., Edwards, R. L., Hoff, J. A., Moran, S. B., … Francois, R. (2012). GEOTRACES intercalibration of 230Th, 232Th, 231Pa, and prospects for 10Be. Limnology and Oceanography: Methods, 10(4), 179–213. - Armand, L. K., O’Brien, P. E., Armbrecht, L., Baker, H., Caburlotto, A., Connell, T., … Young, A. (2018). Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles (IN2017-V01): Post-survey report. ANU Research Publications - Middag, R., Séférian, R., Conway, T. M., John, S. G., Bruland, K. W., and de Baar, H. J. W. (2015). Intercomparison of dissolved trace elements at the Bermuda Atlantic Time Series station. Marine Chemistry, 177, 476–489. - Pérez-Tribouillier, H., Noble, T. L., Townsend, A. T., Bowie, A. R., and Chase, Z. (2019). Pre-concentration of thorium and neodymium isotopes using Nobias chelating resin: Method development and application to chromatographic separation. Talanta, 1–10. - Sargent, M., Harrington, C., and Harte, R. (2002). Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectrometry (IDMS). Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectrometry (IDMS). Royal Society of Chemistry.

Sediment cores were collected from the East Antarctic margin, aboard the Australian Marine National Facility R/V Investigator from January 14th to March 5th 2017 (IN2017_V01; (Armand et al., 2018). This marine geoscience expedition, named the “Sabrina Sea Floor Survey”, focused notably on studying the interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles. The cores were collected using a multi-corer (MC), were sliced every centimetre, wrapped up in plastic bags, and stored in the fridge. Sediment samples were dried in an oven at 40°C and ground using a pestle and a mortar. Biogenic silica (or ‘opal’) analysis was carried out following modification of the protocol of Mortlock and Froelich (1989). About 30 mg of sediment was leached with 30 mL of 1M sodium carbonate (Na2CO3) for 5 hours at 80°C. Every hour, 1 mL of sample was removed and centrifuged at 10,000 rpm for 30 sec. A 200 µL aliquot was removed from the supernatant and diluted 50x with Milli-Q water for SiO2 determination by molybdate-blue spectrophotometry. A standard calibration was prepared by dilution of a SiO2 standard solution (sodium hexafluorosilicate, from 0 to 200 µM). The opal concentrations were calculated using the slope of the last three points of the dissolution curve (Demaster, 1981), or the changing slope part of the curve. References - Armand, L. K., O’Brien, P. E., Armbrecht, L., Baker, H., Caburlotto, A., Connell, T., … Young, A. (2018). Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles (IN2017-V01): Post-survey report. ANU Research Publications. - Demaster, D. J. (1981). The supply and accumulation of silica in the marine environment. Geochimica et Cosmochimica Acta, 45, 1715–1732. - Mortlock, R. A., and Froelich, P. N. (1989). A simple method for the rapid determination of biogenic opal in pelagic marine sediments. Deep-Sea Research Part I, 36(9), 1415–1426.

Peter Sedwick collected water column samples (6 depths, less than 350m) and measured dissolved iron in these samples, using specialised trace-metal clean techniques, at 9 stations along the SR3 transect between 47 deg S and 66 deg S. These are the first such data for this oceanographic sector during spring. The dissolved iron levels were generally very low (less than 0.2 nM nM) in the upper water column, particularly south of the Subantarctic Front, and surprisingly there was no evidence of significant iron inputs from melting sea ice in our study region. Ongoing work quantified various size fractions of dissolved iron as well as total acid soluble iron. In addition, Jack DiTullio collected water samples for measurements of five biogenic sulfur pools at most shallow water CTD casts. The sulfur pools measured include: dimethylsulfide (DMS), particulate and dissolved dimethylsulfoniopropionate (DMSP) and particulate and dissolved pools of dimethylsulfoxide (DMSO). Taken from the referenced paper: A shipboard-deployable, flow-injection (FI) based instrument for monitoring iron(II) in surface marine waters is described. It incorporates a miniature, low-power photoncounting head for measuring the light emitted from the iron-(II)-catalyzed chemiluminescence (CL) luminol reaction. System control, signal acquisition, and data processing are performed in a graphical programming environment. The limit of detection for iron(II) is in the range 8-12 pmol L-1(based on 3s of the blank), and the precision over the range 8-1000 pmol L-1 varies between 0.9 and 7.6% (n )4). Results from a day-night deployment during a north to-south transect of the Atlantic Ocean and a daytime transect in the Sub-Antarctic Front are presented together with ancillary temperature, salinity, and irradiance data. The generic nature of the components used to assemble the instrument make the technology readily transferable to other laboratories and the modular construction makes it easy to adapt the system for use with other CL chemistries.

Sediment cores were collected from the East Antarctic margin, aboard the Australian Marine National Facility R/V Investigator, during the IN2017_V01 voyage from January 14th to March 5th 2017 (Armand et al., 2018). This marine geoscience expedition, named the “Sabrina Sea Floor Survey”, focused notably on studying the interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles. The cores were collected using a multi-corer (MC) and a Kasten corer (KC). The MC were sliced every centimetre, wrapped up in plastic bags, and stored in the fridge. The KC was sub-sampled using a u-channel; and sliced every centimetre once back the home laboratory (IMAS, UTAS, Hobart, Australia). About 200 mg of sediment were dried in an oven at 40°C, ground using a pestle and a mortar and weighed into centrifuge tube. Chlorin (degradation products of chlorophyll-a) was extracted by sonication with acetone (90%; HPLC grade) following Schubert et al., (2005). Sample fluorescence was measured in triplicate by spectrofluorometry, at the excitation wavelength of 428 nm and the emission wavelength of 671 nm. The chlorin concentration was measured as followed: [chlorin] = F/C x 0.000015 / (S/1000) Where [chlorin] is the chlorin concentration in µg/g; F is the averaged fluorimetry intensity; C is the spectrofluorometer constant 1287.9; and S is the sediment weight in mg. References Armand, L. K., O’Brien, P. E., Armbrecht, L., Baker, H., Caburlotto, A., Connell, T., … Young, A. (2018). Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles (IN2017-V01): Post-survey report. ANU Research Publications, (March). https://doi.org/http://dx.doi.org/10.4225/13/5acea64c48693 Schubert, C. J., Niggemann, J., Klockgether, G., and Ferdelman, T. G. (2005). Chlorin Index: A new parameter for organic matter freshness in sediments. Geochemistry, Geophysics, Geosystems, 6(3). https://doi.org/10.1029/2004GC000837

Sediment cores were collected from the East Antarctic margin, aboard the Australian Marine National Facility R/V Investigator, during the IN2017_V01 voyage from January 14th to March 5th 2017 (Armand et al., 2018). This marine geoscience expedition, named the “Sabrina Sea Floor Survey”, focused notably on studying the interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles. The cores were collected using a multi-corer (MC) and a Kasten corer (KC). The MC were sliced every centimetre, wrapped up in plastic bags, and stored in the fridge. The KC was sub-sampled using a u-channel; and sliced every centimetre once back the home laboratory (IMAS, UTAS, Hobart, Australia). About 200 mg of dried and ground sediment were weighed into a clean Teflon vial and oxidized with a mixture of concentrated HNO3 and 30% H2O2 (1:1). The resulting solutions were gravimetrically spiked with ~ 24 pg of 229Th (NIST 4328C, National Institute of Standards and Technology, USA) and ~ 2 ng of 236U (IRMM-3660a, Institute for Reference Materials and Measurements, European Union) and left to equilibrate overnight. Samples were then digested in open vials using an acid mixture comprising 10 mL HNO3, 4 mL HCl, and 2 mL HF, at 180°C until close to dryness. Digested residues were converted to nitric form before being oxidised with a mixture of 1 mL HNO3 and 1 mL HClO4 at 220°C until fully desiccated. Samples were finally re-dissolved in 4 mL 7.5 M HNO3. Thorium and uranium were isolated from the sediment digest using AG1-X8 anion exchange resin (Bio-Rad, USA), following the procedure described in Negre et al., (2009). Prior to analysis, purified samples were filtered using Pall® Acrodisc® ion chromatography syringes and 0.45 μm filters (Sigma-Alderich®, USA). 229Th, 230Th, 234U and 235U were analysed by Sector Field Inductively Coupled Mass Spectrometry (SF-ICP-MS, Thermo Fisher Scientific, Bremen, Germany) at the Central Science Laboratory (UTAS, Hobart, Australia). Samples were introduced in the ICP using an Aridius® II desolvating nebulizer (DSN, CETAC Technologies, USA) and with the capacitive guard electrode turned on to limit the oxide formation and to enhance sensitivity. Samples were analysed in batches of three and bracketed by a natural uranium standard (Certified Reference Material CRM 145, New Brunswick Laboratory, USA) and two acid blanks (2% HNO3, 0.1% HF). The sample introduction system was rinsed for 5 minutes between each sample with a matching 2% HNO3 and 0.1% HF solution. The raw intensities of 230Th and 234U were corrected for procedural blank, tailing and mass bias (Anderson et al., 2012; Shen et al., 2002). The intensity of 230Th was corrected from the tailing of 232Th using the log mean intensities of the half masses 229.5 and 230.5. The mass bias was determined by the measurements of the 235U/234U ratio of the CRM-145. Concentrations were calculated using isotope dilution equations (Sargent et al., 2002). References - Anderson, R. F., Fleisher, M. Q., Robinson, L. F., Edwards, R. L., Hoff, J. A., Moran, S. B., … Francois, R. (2012). GEOTRACES intercalibration of 230Th, 232Th, 231Pa, and prospects for 10Be. Limnology and Oceanography: Methods, 10(4), 179–213. https://doi.org/10.4319/lom.2012.10.179 - Armand, L. K., O’Brien, P. E., Armbrecht, L., Baker, H., Caburlotto, A., Connell, T., … Young, A. (2018). Interactions of the Totten Glacier with the Southern Ocean through multiple glacial cycles (IN2017-V01): Post-survey report. ANU Research Publications, (March). https://doi.org/http://dx.doi.org/10.4225/13/5acea64c48693 - Negre, C., Thomas, A. L., Mas, J. L., Garcia-orellana, J., Henderson, G. M., Masque, P., and Zahn, R. (2009). Separation and Measurement of Pa , Th , and U Isotopes in Marine Sediments by Microwave-Assisted Digestion and Multiple Collector Inductively Coupled Plasma Mass. Analytical Chemistry, 81(5), 1914–1919. https://doi.org/10.1126/science.276.5313.782.(3) - Sargent, M., Harrington, C., and Harte, R. (2002). Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectrometry (IDMS). Guidelines for Achieving High Accuracy in Isotope Dilution Mass Spectrometry (IDMS). Royal Society of Chemistry. https://doi.org/10.1039/9781847559302-00001 - Shen, C.-C., Lawrence Edwards, R., Cheng, H., Dorale, J. A., Thomas, R. B., Bradley Moran, S., … Edmonds, H. N. (2002). Uranium and thorium isotopic and concentration measurements by magnetic sector inductively coupled plasma mass spectrometry. Chemical Geology, 185(3–4), 165–178. https://doi.org/10.1016/S0009-2541(01)00404-1

During the K-Axis marine voyage from mid Jan-late Feb 2016, a diverse range of sampling techniques were employed to collect specimens and data. Each sampling event was recorded by scientists and technical support staff in a logbook that was kept in the operations room on board the Aurora Australis. This is a direct digital copy/transcription of the paper logbook. event_number: A unique event identifier in the log, in the order that the events were written down (usually but not always chronologically) event_type: The code defined and used by each research project to identify the types of equipment deployed or samples collected for an event. event_type_prefix: A non-mandatory prefix field used by some research projects to identify the type of an event event_type_number: A sequential number or alphanumeric-number combination defined and used by each research project to identify unique equipment deployment or sample collection events station_number: A universal (voyage-wide) station number used across all projects to identify a nominal lat/lon position defined during voyage planning leg: A nominally straight-line section of the voyage track defined during voyage planning. The voyage track was planned as a series of roughly N-S and E-W transects that intersected in some locations. Legs start at a station and continue through more stations to a vertex-station which is the start of the next leg. Legs are numbered consecutively. waypoint: A GPS waypoint used by Aurora Australis crew, AAD science technical support and researchers to identify target lat/lon positions in the voyage. Some waypoints correspond with station numbers. start_date_utc: The start date of the event in UTC start_time_utc: The start time of the event in UTC start_lat_deg: The latitude (whole degrees) of the vessel at the beginning of the event start_lat_min: The latitude (minutes) of the vessel at the beginning of the event start_lat_dec_deg: The latitude (decimal degrees) of the vessel at the beginning of the event start_lon_deg: The longitude (whole degrees) of the vessel at the beginning of the event start_lon_min: The longitude (minutes) of the vessel at the beginning of the event start_lon_dec_deg: The longitude (decimal degrees) of the vessel at the beginning of the event end_date_utc: The end date of the event in UTC end_time_utc: The end time of the event in UTC end_lat_deg: The latitude (whole degrees) of the vessel at the end of the event end_lat_min: The latitude (minutes) of the vessel at the end of the event end_lat_dec_deg: The latitude (decimal degrees) of the vessel at the end of the event end_lon_deg: The longitude (whole degrees) of the vessel at the end of the event end_lon_min: The longitude (minutes) of the vessel at the end of the event end_lon_dec_deg: The longitude (decimal degrees) of the vessel at the end of the event remarks: Comments/remarks written by researchers when completing the paper log transcribe_comments: Comments/remarks made by the transcriber when the log was digitised